Dumb Question about boat trailers???????
08-10-2004, 11:39 AM
#1
Registered
Thread Starter
Dumb Question about boat trailers???????
Why the hell did some trailer companys make them using steel BOX tubing??? Do they not see it holding water inside the frame after a boat is launched then rusting out in a few years? 
Charter Member
Platinum Member
08-10-2004, 12:55 PM
#7
Registered
Thread Starter
Re: Dumb Question about boat trailers???????
Originally Posted by JUST ONCE
yup, get a drill, problem solved.
Too late on mine. Rust has made it own holes. I called the local steel shop and apparently 2x5 11 gauge box isn't very popular.
My other boat trailer is much older and made of channel steel. Keep paint on it and it will last forever. But it makes sense of what Reed said. It would be a heavy as5 trailer for bigger boats.
Last edited by Shah Mat; 08-10-2004 at 01:20 PM.
08-10-2004, 12:56 PM
#8
Registered
Thread Starter
Re: Dumb Question about boat trailers???????
Originally Posted by Cord
Skater fills their trailers with argon and pressurizes it.
Last edited by Shah Mat; 08-10-2004 at 12:58 PM.
08-10-2004, 01:18 PM
#9
Registered
Thread Starter
Re: Dumb Question about boat trailers???????
Who makes good, reasonably priced aluminium trailers?
And.....Who makes good, reasonably priced steel trailers?
For a 25'
And.....Who makes good, reasonably priced steel trailers?
For a 25'
