Looking for info about 30 Cobra Terminator
#3
Registered
Join Date: Sep 2001
Location: Nashville, TN
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for info about 30 Cobra Terminator
I've had mine for three years. It has twin HP500 carb motors and stock Bravo outdrives. It runs right at 100 mph GPS.
For the money it's a great cat. It's built very solid with balsa core throughout. Like a lot of cats it tends to lean outside at lower speeds, but nothing you don't learn to handle or get used to. At higher speeds it takes a set and runs like it's on rails.
Here's a picture of mine. I can get some more uploaded later if you want.
Are you looking at Kieth's?
For the money it's a great cat. It's built very solid with balsa core throughout. Like a lot of cats it tends to lean outside at lower speeds, but nothing you don't learn to handle or get used to. At higher speeds it takes a set and runs like it's on rails.
Here's a picture of mine. I can get some more uploaded later if you want.
Are you looking at Kieth's?
Last edited by jbrauer; 09-17-2007 at 07:47 PM.
#4
Registered
Re: Looking for info about 30 Cobra Terminator
Kevin i have a customer that has one single engine set up with one of our MB600 that runs 83 on his gps and is very happy with its ride and performance i have had the boat here when we installed the engine and the construction look very well finished and very solid no cracks anywhere.good luck Laz Mesa
#5
Platinum Member
Platinum Member
Join Date: Apr 2001
Location: Saratoga Springs, N.Y.
Posts: 2,910
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for info about 30 Cobra Terminator
Hey Kevin, I think you would look better in a certain 30 Spectre!!!1 Just kiddin!!! See ya this weekend.