Tomorrow morning I see what the damage is...
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: Niskayuna, NY
Posts: 5,548
Likes: 0
Received 0 Likes
on
0 Posts
Tomorrow morning I see what the damage is...
Tomorrow morning I pull the starboard engine apart on the little Skater. No I don't have a big one too, it's just small. Anyway, I will pull the intake and carb's off, pop the rod cap, and pull the piston and rod out. Hopefully, the damage will be minor and I will be able to just rebuild the carb's and replace the piston and rings and gaskets. It took me till this weekend because on top of hitting the curb at the gas station and blowing a tire and having the one cylinder go down, I got a HORRIBLE case of sun poisoning and was violently sick all night Saturday, all day Sunday and part of Monday. So it is back to the lake tonight and begin wrenching in the AM.
Hopefully, I can order the parts tomorrow, have them in during the week and have her back and running next weekend. That is provided there is no cylinder damage and no re-sleeving required. I guess everyone can be hopefull once in a while.
Have a good weekend everybody and BE SAFE!
Hopefully, I can order the parts tomorrow, have them in during the week and have her back and running next weekend. That is provided there is no cylinder damage and no re-sleeving required. I guess everyone can be hopefull once in a while.
Have a good weekend everybody and BE SAFE!
#2
VIP Member
iTrader: (1)
Re: Tomorrow morning I see what the damage is...
Hope the damage isn't too bad. Hope you are feeling better too!!!
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#3
Registered
Re: Tomorrow morning I see what the damage is...
Originally Posted by Shane
Tomorrow morning I pull the starboard engine apart on the little Skater. No I don't have a big one too, it's just small. Anyway, I will pull the intake and carb's off, pop the rod cap, and pull the piston and rod out. Hopefully, the damage will be minor and I will be able to just rebuild the carb's and replace the piston and rings and gaskets. It took me till this weekend because on top of hitting the curb at the gas station and blowing a tire and having the one cylinder go down, I got a HORRIBLE case of sun poisoning and was violently sick all night Saturday, all day Sunday and part of Monday. So it is back to the lake tonight and begin wrenching in the AM.
Hopefully, I can order the parts tomorrow, have them in during the week and have her back and running next weekend. That is provided there is no cylinder damage and no re-sleeving required. I guess everyone can be hopefull once in a while.
Have a good weekend everybody and BE SAFE! :cool
Hopefully, I can order the parts tomorrow, have them in during the week and have her back and running next weekend. That is provided there is no cylinder damage and no re-sleeving required. I guess everyone can be hopefull once in a while.
Have a good weekend everybody and BE SAFE! :cool
Why did you call me the other day to see if I wanted to buy it ??
#6
Registered
Thread Starter
Join Date: Oct 2000
Location: Niskayuna, NY
Posts: 5,548
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tomorrow morning I see what the damage is...
Originally Posted by otis311
Why did you call me the other day to see if I wanted to buy it ??
#8
Charter Member #232
Charter Member
Re: Tomorrow morning I see what the damage is...
Hey Shane if you have cylinder that came off on the cylinder walls you can use acid to take that off then nutralize it when you are done. It takes a while to do but I have done it many times with success.
Hope you get it back running with out to much effort.
Jon
Hope you get it back running with out to much effort.
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#9
Re: Tomorrow morning I see what the damage is...
Soory to here your down.
If you need a hand pulling the power head Im only a phone call away.
Hope its not too bad and your back in the game soon.
If you need a hand pulling the power head Im only a phone call away.
Hope its not too bad and your back in the game soon.
#10
Registered
Re: Tomorrow morning I see what the damage is...
Originally Posted by Shane
Yup. You told me that if I ever wanted to sell it you would buy it. Just taking your temperature . Been thinking about sending it down the road to go bigger and this may be just the reason. Maybe a subliminal message.