Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   2005 f150 or dodge 1500 hemi (https://www.offshoreonly.com/forums/general-boating-discussion/93290-2005-f150-dodge-1500-hemi.html)

HOUSTONPROP 12-28-2004 12:17 PM

Re: 2005 f150 or dodge 1500 hemi
 
I have a 2004 dodge hemi ,yes is has the power and torque,but rides like a lumber wagon ,rocks you back and forth when pulling in bumpy drive ways,,plus the hemi ?insurance is a killer and it sucks gas like you won"t belive,the resale is terrible and the interior is not as strong or good looking as the ford ,the ford is a little mushy when it comes to power ,I WOULD GO WITH A FORD FX4X4 ,LONG WHEEL BASE NICE RIDE AND will last a life time,my 2 cents go with a chevy or ford ,Good Luck.Darin

Sydwayz 12-28-2004 12:56 PM

Re: 2005 f150 or dodge 1500 hemi
 
2 Attachment(s)

Originally Posted by formulaz583
Thats not totally correct. My Ram is rated at 8600 lbs. That is its max rated number. That is for the TRUCK. It doesn't matter what kind of towing system you use. If you read the fine print, it says when equipted with towing package etc. but here is the kicker. The factory installed hitch is only rated at 5000 lbs carrying. So I installed a 10K rated Draw tite. Thats where ALL the companies shortchange you. That 5K hitch is rated 10K with weight dist. bars. But for a boat you need weight Carrying capacity. If you check the rating on even the 2500 or 3500 trucks, you will probably see that the hitches they install are NOT rated as high as the truck is, UNLESS you are using bars. and unless you want to buy adapters for your boat trailer, the dist. bars only work on "V" shaped trailer tongues.

Weight distributing hitch works GREAT on my 12K rig pulled by a 2500 Avalanche on the factory hitch.
I first went with a WD Hitch as described in this thread:

http://www.offshoreonly.com/forums/s...vy+hitch+balls

Now I have Putnam Class-V hitch on order, and I am 100% legal either way.

I'll buy a dually one day, but the Avalanche suits my needs perfectly for the time being.

h2owarrior 12-28-2004 01:00 PM

Re: 2005 f150 or dodge 1500 hemi
 

Originally Posted by Sydwayz
Weight distributing hitch works GREAT on my 12K rig pulled by a 2500 Avalanche.
I first went with a WD Hitch as described in this thread:

http://www.offshoreonly.com/forums/s...vy+hitch+balls

Now I have Putnam Class-V hitch on order, and I am 100% legal either way.

Nice set up. If you go with electric or electric over hydraulic (my preference) you avoid any potential issues with the WD bars interfering with the surge brakes.

robyw1 12-28-2004 01:20 PM

Re: 2005 f150 or dodge 1500 hemi
 
You should grab life by the horns and don't be found on road dead.

Roby

Sydwayz 12-28-2004 01:45 PM

Re: 2005 f150 or dodge 1500 hemi
 
I've got Bendix Brake Industrial Ceramic Pads on Kodiak NC Discs on 4 wheels of the trailer AND Baer Cross-Drilled Rotors ( http://www.baer.com/ ) with Carbon Metallic Brakes on the Avalanche. It stops very well. If you got the deal on the AV that I did, you would stick with it too. OSO member 'bsag' hooked me up.

GregP 12-28-2004 02:03 PM

Re: 2005 f150 or dodge 1500 hemi
 
I'm looking at Dodge, would consider Silverado, but the looks of the Avalanche is, shall we say, not to my taste.

Hauling Trash 12-28-2004 02:05 PM

Re: 2005 f150 or dodge 1500 hemi
 
Luke

Go with the Dodge , I have one and love the truck.

Mike

Sydwayz 12-28-2004 02:18 PM

Re: 2005 f150 or dodge 1500 hemi
 
:D :D
No issues with folks liking or not liking the AV. We've been over that, and I am NOT pushing them. Heck, even the Silverado looks ridiculous with the Avlanche front end. When I buy a dually it will be GMC or Ford.

"There is no such thing as too much truck" is my only point, and the reprecussions are not worth the risk of skimping anywhere.

Hauling Trash 12-28-2004 02:44 PM

Re: 2005 f150 or dodge 1500 hemi
 
Luke

Let me know if you like to take it for a ride

Mike

robyw1 12-28-2004 03:34 PM

Re: 2005 f150 or dodge 1500 hemi
 

Originally Posted by Sydwayz
I've got Bendix Brake Industrial Ceramic Pads on Kodiak NC Discs on 4 wheels of the trailer AND Baer Cross-Drilled Rotors ( http://www.baer.com/ ) with Carbon Metallic Brakes on the Avalanche. It stops very well. If you got the deal on the AV that I did, you would stick with it too. OSO member 'bsag' hooked me up.

Any problems with warping? also are the rotors slotted or just cross drilled? My brother needs to improve the stock brakes on his 02 AVA.

Roby


All times are GMT -5. The time now is 08:07 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.