New Tmp Motors!
#1
Registered
VIP Member
Thread Starter
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
New Tmp Motors!
The verdict is in. We just finished dyno runs on our new TMP quad rotor whipples.
1193 Hp at 6250 on 91 Octane Pump Gas at 9.9#'s of boost.
1414 HP on a 50/50 mix of 91 octane and 110 race gas with smaller pulleys.
The only thing you do to step up 200HP is change the pulleys and go one range colder on the plugs and the ECM compensates for everything else.
I want to publicly thank Eddie and Steve for an UNBELIEVABLE set up. EDDIE.....YOU DA MAN!!!!!
1193 Hp at 6250 on 91 Octane Pump Gas at 9.9#'s of boost.
1414 HP on a 50/50 mix of 91 octane and 110 race gas with smaller pulleys.
The only thing you do to step up 200HP is change the pulleys and go one range colder on the plugs and the ECM compensates for everything else.
I want to publicly thank Eddie and Steve for an UNBELIEVABLE set up. EDDIE.....YOU DA MAN!!!!!
#5
Re: New Tmp Motors!
ho-lee-krap . . . those are some nice #'s . . . where do i sign up
congrats man . . .very impressive for sure
congrats man . . .very impressive for sure
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#6
Registered
VIP Member
Thread Starter
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Tmp Motors!
43 foot Nortech Cat. We went down and rode in the Cyclone boat and the tmp motors were awesome. Idled like an hp500 with no blower surge. We have had KE, Sterling, and merc and none of them could hold a candle to the drivability of these motors. It is killing us because it will be march before everything is finished.
#8
Registered
VIP Member
Thread Starter
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Tmp Motors!
They were very very competitve with other builders in this hp range. We bought these based on the power, driveability, and longer service intervals compared to anything else out there. Apples to apples there was no other competition. The ecu's in these motors are absolutely "dialed in". I also looked at another pair of these over a 2 year period at 100 and 200 hour intervals after dissasembly and they were immaculate. After looking into the oil filter after the intial dyno run, there was nothing in the filter but a tiny bit of lint. We watched this motor program for 2 years before this step. TMP has also built 2 other sets of engines 540's for me for other boats and they are awesome. We put a lot of hours on every season and dependability was a key factor.
#9
Registered
VIP Member
Thread Starter
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Tmp Motors!
Happiness is a 1414 HP Dyno run! Here is a picture of the dyno screen on the very first run where it made 1185.4 at 6300 before a couple of adjustments. It will be Monday before I get to the office and scan the other sheets.