Re: Molds on ebay
9100 .. id think you could buy a bare hull for around that and make a plug ..
Oh then theres the popping issue :D |
Re: Molds on ebay
Originally Posted by Rottiguy
I bid on them, but got out bid in the last 30 seconds, went for $9100 :( damn I wanted em, I hope edwinally or whatever actually builds a few. A good friend of mine has some 21 and 41 v molds, but I really wanna cat, anyone know of anything else out there?
Jon |
Re: Molds on ebay
Originally Posted by Pantera1
9100 .. id think you could buy a bare hull for around that and make a plug ..
Oh then theres the popping issue :D Jon |
Re: Molds on ebay
I know what you are saying. To make a plug that is worth ripping off, then make the mold that is ready to go would be WAY more then 9 grand. Probably around 30K would be my guess. Remember the mold has to be ULTRA riggid.
Jon |
Re: Molds on ebay
Ya true .. by the time your done with the mold its $$$ If those molds were ready to wax they were a steal .. Im guessing they were swimming pools :D
|
Re: Molds on ebay
I E-mailed him looking to buy or have him send me just a copy...xerox.... low quaility copy of the plans, I don't want numbers... I just want to see what they look like.... and he never wrote me back.... does anyone know where I can get plans to a "real" boat.... bulkheads hull... everything... I have a few lines drawings I have made on my own... and am not interested in copying someones boat... I just want to make a "real" set of plans for the boat I am currently drawing..... I have access to CAD and all the printing equipment... just need to know what to make it look like so other.... real naval arcitect will know what they are looking at....
Ernie |
Re: Molds on ebay
|
Re: Molds on ebay
I saw pics of the molds, they didnt look that great, but I think with a little work, I think they could have worked. My friend tried calling pat at active thunder but never got a call back so I think somethings funny too.
|
Re: Molds on ebay
This doesn't make sense. The listing is terrible. The followup is poor. The guy has very little feedback. Yet, people are bidding away. The other mold autions that I've seen never had more than two or three bids on them. What's the difference on this one?
|
Re: Molds on ebay
The people who bid away knew what the molds were. The link was clear and the second page shows the molds. A quick polish and 5 or 6 coats of release wax and they are good to go. I didn't answer phone calls or spend much time on e-mails because I knew they were sold one way or the other. We'll see if the deal goes through. At this point it looks like it though.
|
All times are GMT -5. The time now is 02:05 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.