Replacing Wood Flooring
#1
Registered
Thread Starter
Join Date: Jan 2002
Location: Atlanta
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Replacing Wood Flooring
I am in the process of replacing the rotted wood main section in my floor and am looking for alternatives. Has anyone had any experience with non-wood products, pvc sheets, etc.? I would rather look at this alternative for ease of use and longetivity. Any thoughts on what and where I could find it.
Thanks Mike
Thanks Mike
#2
Registered
Re: Replacing Wood Flooring
I replaced my floor with 3/4" deckolite. I wanted the honeycome and fome panels that the boat was built with I think it was called wescore but couldn't get it. Juat remember that when you use a foam or balsa cored panel, through bolt your seats down with a stainless fender washer or plates under the floor or the seats could rip out while riding the rough stuff. It happened to the owner before me
#3
Re: Replacing Wood Flooring
i did the floor in my scorpion with Corion. turned out great . . . . .an its food service rated in 50 states
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#4
Registered
Thread Starter
Join Date: Jan 2002
Location: Atlanta
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Re: Replacing Wood Flooring
Twoks,
Where do I get 3/4" deckolite?
I had it through bolted before as you suggested. It happened to me with the current setup and I ended up in the back seat.
Thanks Mike
Where do I get 3/4" deckolite?
I had it through bolted before as you suggested. It happened to me with the current setup and I ended up in the back seat.
Thanks Mike
#5
Guest
Posts: n/a
Re: Replacing Wood Flooring
Originally Posted by mleslie951
Twoks,
Where do I get 3/4" deckolite?
I had it through bolted before as you suggested. It happened to me with the current setup and I ended up in the back seat.
Thanks Mike
Where do I get 3/4" deckolite?
I had it through bolted before as you suggested. It happened to me with the current setup and I ended up in the back seat.
Thanks Mike
4099 Old Dixie Highway
Atlanta, GA 30354
800-535-4481
FAX 615-650-5308
http://www.baltek.com/products/decolite/decolite.html
http://www.interplastic.com/html/nac_distrib_loc.htm