Rambunctious

I am doing an exhaust modification project on my silent thunder exhaust system. any cheap or free ) thru hull tips laying around?

I don't care the condition. (flanges cracked, dents, doesn't matter) I just need 4" Dia stainless and don't want to by 10' section for the 4 x 4" long pieces i need for this project.
two thru hull tips will be enough material for my project.

I'll even pay shipping

thanks

Ramb

BURNSMAZZ

What kind of tips are you looking for? I've got four with rubber flappers out of my Baja.

dyno

Rob call me I have a set we can deal on! 616-403-4482

Rambunctious

burnzmazz,

I really only need the 4" diameter tubing. I will be cutting 4 pieces about 4" long with 22 deg angle on one end. this is for an exhaust routing that will be internal to my 88 formula silent thunder swim platform ( exaust flows inside the platform)

dyno.... I 'll call you too. thanks......

ramb

Lofty

I've got 4 Rex tips w/ no-burn flaps inside. Switching to GGB's with the new dB laws and all. I'll cut you a great deal!

Fionn
510.541.8124
[email protected]

bryanspeedracer

Rambunctious,

I have four, 4"x4" through hull (w/o flange) tips that you can have if you want them. Shipping only.

Bryan

Zanie

Fionn,
I'm interested, I sent you email.
Thanks,
Dan

2112

I have four of these too. 4". NEVER installed!

Will part for way less than cost. PM me if interested.

BajaRunner

2112 im interested. your pm box is full

2112

I e-mailed you.

I also have a set of 4 NEVER used through transom tips that are 4"diameter. These have internal fixed anti-reversion flappers.