Imco drive will not go on.
04-18-2005, 05:21 PM
#11
VIP Member
Re: Imco drive will not go on.
Originally Posted by Dave_N
I'm with John. If you havn't done the required bell housing mod, it won't ever go on. Dare I suggest you read the installation sheet that came with the drive?
Dave
Dave
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
04-18-2005, 06:52 PM
#12
Registered
Thread Starter
Join Date: Feb 2003
Location: bluffton sc
Posts: 1,517
Likes: 0
Received 0 Likes
on
0 Posts
Re: Imco drive will not go on.
Just left MRD marine,have to cut bottom of helmet to allow water pickup to clear> I got home cut it off and it still wont go in.I pushed enough to move the boat and trailer so there's a problem.Went and got the alignment tool just to make sure and yes its the wrong Fnnnnn tool.Someone modified a regular bravo by 7 inches but the bearing is way to big on the xr so you cant align without the proper tool.Moral of the story by the right tool for the job so you dont end up as one.
Thanks for the help!
Thanks for the help!
