454 rebuild complete
#5
VIP Member
VIP Member
Re: 454 rebuild complete
No doubt in my mind that you should crack 80mph with the right prop...
You may want to figure out a way to sit rather than standing at that speed...
Good Luck Storm!
Hope to see you out there this Summer...
You may want to figure out a way to sit rather than standing at that speed...
Good Luck Storm!
Hope to see you out there this Summer...
__________________
Patrick
Patrick
#6
JC Performance Engines
Gold Member
Thread Starter
Re: 454 rebuild complete
Finally ready for the water test tonight.
Gonna try to dial in a labbed 26 B1.
UH, Can i leave my office yet???
Gonna try to dial in a labbed 26 B1.
UH, Can i leave my office yet???
#7
Gold Member
Gold Member
Re: 454 rebuild complete
Originally Posted by Stormrider
Finally ready for the water test tonight.
Gonna try to dial in a labbed 26 B1.
UH, Can i leave my office yet???
Gonna try to dial in a labbed 26 B1.
UH, Can i leave my office yet???
#8
VIP Member
VIP Member
Re: 454 rebuild complete
Originally Posted by Dave M
Congrats! I bet you are going to need more than 26P. I'm turning a 28P to almost 5K with only 425HP.
Storm is shooting for 5700rpm...
If he gets there with a 26p... 81-82mph
__________________
Patrick
Patrick
#9
JC Performance Engines
Gold Member
Thread Starter
Re: 454 rebuild complete
That labbed 26 was a pc o'sh*te. It was labbed w/ a hammer.
Could barely get past 5100rpm. Probably need to run a 24P.
Could barely get past 5100rpm. Probably need to run a 24P.