Go Back  Offshoreonly.com > Technical > General Q & A
dry sump belt and bracket setup >

dry sump belt and bracket setup

Notices

dry sump belt and bracket setup

Old 01-22-2009, 06:50 PM
  #1  
Registered
Thread Starter
 
Join Date: Apr 2008
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Default dry sump belt and bracket setup

Hi! Does anyone know of anyone who makes these setups? I have a Keith Eickert three stage stainless sea pump. I know he has a whole setup with a crossover that mounts the alternator up high and power steering above the sea pump. It mounts off the crossover. Then the dry sump oil pump mounts low where the alternator used to be. I have seen other setups, but don't know who makes them. Any input on other brands or any advice on them would be appreciated. Thanks Charlie
598Boat is offline  
Old 01-22-2009, 08:54 PM
  #2  
Platinum Member
Platinum Member
 
WildWarrior's Avatar
 
Join Date: Aug 2004
Location: PA/ MD
Posts: 396
Likes: 0
Received 1 Like on 1 Post
Default

We found out the hard way running real high boost for several seasons and taking out an occasional blower belt,know big deal always keep a few in stock and on the boat..

A few seasons back our blower belt took out our oil pump belt at well over 6000 rpms and we threw a Carrillo through the block.

Now we have a spare sleeved Dart block and a spare repaired crank all because of a $150.00 blower belt..

We also run Kieth's three stage water pumps and billet oil pump.

Rudy Dryden our engine builder fabricated our guards following our sudden pop.

I will ask Rudy what it would cost for a pair!

Here is pick of one of our aluminum guards, real simple but protects the oil pump belt just fine!
Attached Thumbnails dry sump belt and bracket setup-113_1357.jpg  
WildWarrior is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CcanDo
General Q & A
4
01-22-2009 06:53 PM
TeamPSI
General Q & A
6
02-01-2007 10:13 AM
gripit
General Q & A
10
07-15-2006 08:35 PM
JCPERF
General Boating Discussion
53
02-22-2006 09:48 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Quick Reply: dry sump belt and bracket setup


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.