496 Durability?
#11
Re: 496 Durability?
Hey boys had 19 hours on 496 mag and blew motor.Merc replaced with long block and I won't know exactly what happen till Merc send out a report.Mechanic thinks blow head gasket.
#12
Registered
Re: 496 Durability?
parked my HO's on the dash 80% of 60-70 mile fun run last Sat.
Fresh Mobil 1
Never missed a beat. 128 hours on 'em
My 353 ran 72 and small change all day @4900 on 26 Bravos...in 90* heat and high humidity.
my NavMan plotter/fuel tells me on about 80 gallons of gas.
More than pleased.
Fresh Mobil 1
Never missed a beat. 128 hours on 'em
My 353 ran 72 and small change all day @4900 on 26 Bravos...in 90* heat and high humidity.
my NavMan plotter/fuel tells me on about 80 gallons of gas.
More than pleased.
#15
Re: 496 Durability?
Originally Posted by myturn
What is the oil consumption?
#18
Re: 496 Durability?
I also have prochargers on my 2001 formula 353 I am running the 3.5 lb kit started with low 70's running consistent 80-83 gps nose coned my bravo1 and 30 pitch props removed the reversion plate on my exhaust .
runs great Doug at Dixie is awsome recomend him to anyone..
Island Hopper does yopur Formula chime walk any after 80mph..mine seams to get a little squirly up there can't figure out why yet..
runs great Doug at Dixie is awsome recomend him to anyone..
Island Hopper does yopur Formula chime walk any after 80mph..mine seams to get a little squirly up there can't figure out why yet..
Last edited by causin trouble; 07-19-2005 at 10:22 PM. Reason: adding photo
#19
Registered
Join Date: Oct 2002
Location: Louisville Ky
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: 496 Durability?
CT,
No, I am not having any chine walking. Are you turning your props in or out? Mine are turning out. I believe, if I recall corretly the drives should be towed in 1/4" at the prop shaft. Do not know if this will make a diference or not. Formula sets this from the factory. Check with them for the exact measurement.
No, I am not having any chine walking. Are you turning your props in or out? Mine are turning out. I believe, if I recall corretly the drives should be towed in 1/4" at the prop shaft. Do not know if this will make a diference or not. Formula sets this from the factory. Check with them for the exact measurement.