Remote oil filter ?

[mwdill]

Originally Posted by docmanrich37

Thanks for the ideas everyone.I'll try that next week.Will i would try it with one of the diapers but if you remember i gave you my last one when you where crying about the little bit of water that came over your bow in those 1 footers we had on the run on sat.lol

I needed more than 1 ! :

[rbtnt]

Take a look at this one from Billet. The second picture down.

http://www.billetmarine.com/Our%20Products.htm

Spins on in place of your old filter and you just replace the element from the top in the future. They're a little pricey, but look great.

[GOODT]

have to go with pwbt33 after doing hundreds of oil changes, pop a hole all the though the two layers in the filter, tall filter = about 4" short = about 2" and let it sit about 20 min or longer put a rag aroud the bottom just in case and make sure the old o ring isnt stuck to the mounting surface.. no mess no fuss peice of cake!!!!

[docmanrich37]

Originally Posted by rbtnt

Take a look at this one from Billet. The second picture down.

http://www.billetmarine.com/Our%20Products.htm

Spins on in place of your old filter and you just replace the element from the top in the future. They're a little pricey, but look great.

Looks like i found the way to go.A friend had one on he's eliminator and he loved it.ordering mine today.thanks