Hemi Project finished at Mesa
#1
Registered
Thread Starter
Hemi Project finished at Mesa
Guys this is the Road Runner I posted last month and here it is finished tuned installed and ready for delivery yesterday. Steeve called me and asked me if I would deliver it and I told him he had to pick it up so he could drive it before I would give it back. He came to pick it up about 11 in the morning we drove to the end of the block and he stood in it when he got to 3 rd gear he looked over at me and didn't say anything the smile on his face was priceless this is a guy who's not easy to please he owns and runs three strip bars . When he brought me back to the shop the only thing he said was I can't thank you enough it was everything I wanted .
#2
Registered
Thread Starter
Re: Hemi Project finished at Mesa
Here are a couple of pics on the dyno the week before install . We also rewired the engine compartment and custom fab an aluminum radiator to cool the elephant and 1/2 fuel lines from Straight Line .
#6
Registered
Thread Starter
Re: Hemi Project finished at Mesa
Originally Posted by ratman
well laz wtf, what were the dyno numbers bro?
#7
Charter Member #927
Charter Member
Re: Hemi Project finished at Mesa
You had better put a boat hitch on that puppy uf you are going to show it on this site.
Just kidding.
It looks great!! Nice job. Great numbers too.
Just kidding.
It looks great!! Nice job. Great numbers too.
#8
Registered
Thread Starter
Re: Hemi Project finished at Mesa
Originally Posted by Payton
You had better put a boat hitch on that puppy uf you are going to show it on this site.
Just kidding.
It looks great!! Nice job. Great numbers too.
Just kidding.
It looks great!! Nice job. Great numbers too.
Thread
Thread Starter
Forum
Replies
Last Post
MESABALANCING
General Q & A
8
07-11-2005 09:59 AM