idle mixture for dominator carbs
08-18-2005, 10:33 AM
#1
Registered
Thread Starter
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
idle mixture for dominator carbs
what should the base line be for # of turns out on the idle mixture screws? in is leaner correct?
Platinum Member
08-18-2005, 01:45 PM
#5
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Re: idle mixture for dominator carbs
Are you sure? Is it a blower carb?
Anyway, I started 1 1/2 out ended up with abot 1 on primaries and less than 3/4 on secondaries.
Anyway, I started 1 1/2 out ended up with abot 1 on primaries and less than 3/4 on secondaries.
Originally Posted by ratman
which are the primaries? the butterflys all open at the same time.
08-18-2005, 05:17 PM
#6
Registered
Thread Starter
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
Re: idle mixture for dominator carbs
single 1050 dominator on a n/a 577ci eng. just looking for a base line adj for the idle circuit mixture
Charter Member
08-18-2005, 08:36 PM
#9
