XR Spacers
#1
Registered
Thread Starter
Join Date: Jul 2004
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
XR Spacers
I have one inch spacers in my XR drives now and Julie tells me to go to 2 inch.
Can I buy another one inch kit and stack it on or do I need to buy a 2 inch kit which is more money?
I think in addition to the spacers, I need longer studs and a longer coupler for the drive shaft. How about shift shaft?
Anything else I need?
I'll probably do the labor myself. Any tricks?
Thx - JON
Can I buy another one inch kit and stack it on or do I need to buy a 2 inch kit which is more money?
I think in addition to the spacers, I need longer studs and a longer coupler for the drive shaft. How about shift shaft?
Anything else I need?
I'll probably do the labor myself. Any tricks?
Thx - JON
#2
Registered
Join Date: Jul 2004
Location: Chester, VA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Re: XR Spacers
I dont know about the 1" to 2" spacer if you can add two of them together or not. However, if you have to replace your spacer with at 2" kit, I will buy your 1" spacer kit from you because Julie is telling me that I need a 1" spacer on my drive.
Just let me know if you want to get rid of the 1" spacer kit.
Rodney
Just let me know if you want to get rid of the 1" spacer kit.
Rodney
#3
Registered
Join Date: Apr 2001
Location: Cave Creek, AZ
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
Re: XR Spacers
JNewton - I posted this in your other thread as well, but I might have a set of 2" spacers that I don't need. I want to try 3" spacers on my boat to see how they work.
#4
Registered
Thread Starter
Join Date: Jul 2004
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Re: XR Spacers
Originally Posted by gottafever
I dont know about the 1" to 2" spacer if you can add two of them together or not. However, if you have to replace your spacer with at 2" kit, I will buy your 1" spacer kit from you because Julie is telling me that I need a 1" spacer on my drive.
Just let me know if you want to get rid of the 1" spacer kit.
Rodney
Just let me know if you want to get rid of the 1" spacer kit.
Rodney
Thanks - JON
#5
Registered
Re: XR Spacers
I am looking for at least a one inch spacer for a single but would also do a 2 inch or 1,5 inch spacer depending what was available. Any sellers out there? greg