A little advice
#1
Registered
Thread Starter
Join Date: Jan 2006
Location: Lawrenceburg, Indiana
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
A little advice
hey guys/gals i've been arround boats my whole life. just bought a '89 four winns liberator 211. (for next to nothing) just built a 400 hp smallblock for it. what kind of speed should i expect, and is this a decent project boat???
#2
Registered
Re: A little advice
Any project that cost you next to nothing is a great project start.Now you just have to figure on how to put next to nothing into it and you are set.
#5
Registered
Join Date: Oct 2005
Location: Ankeny IA
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Re: A little advice
Welcome to the club. Both the OSO site, the "bought a Lib for cheap," (mines a '87 241) and the just built a 400HP SBC for it. Motor ingested water and dropped a valve seat. Interior is like showroom.
Mine has an Alpha drive on it, with the old "stock" (?) 350 Mag (Carb) it did 42. My local boat expert told me to expect 53-56mph.
I hope you have an alpha or bravo, if you have an alpha, I'd put a drive shower on it.
Mine has an Alpha drive on it, with the old "stock" (?) 350 Mag (Carb) it did 42. My local boat expert told me to expect 53-56mph.
I hope you have an alpha or bravo, if you have an alpha, I'd put a drive shower on it.
#6
Registered
Join Date: Feb 2001
Location: LANCASTER, NEW YORK 14086
Posts: 422
Likes: 0
Received 4 Likes
on
2 Posts
Re: A little advice
Welcome ! I have an 86 211 Liberator. SBC about 375 - 400 HP. The top speed that I see is about 57 MPH GPS. But I really haven't spent any time dialing the boat in, Trying various props etc. With the original 260 Mercruiser and Alpha drive the boat would run 50. By the way don't believe all the stories you are going to hear about the Alpha drive if your boat has one. Again, mine is 20 yrs. old and is in excellent condition according to my mechanic. It was just gone through for the first time and he said all the internals look good. The only thing was it needed to be resealed. I use synthetic drive lube and a shower!
Good luck with your boat, Dave
Good luck with your boat, Dave
#7
Re: A little advice
Originally Posted by jamieslib
hey guys/gals i've been arround boats my whole life. just bought a '89 four winns liberator 211. (for next to nothing) just built a 400 hp smallblock for it. what kind of speed should i expect, and is this a decent project boat???
Is it a decent project boat in what respect?
How are the transom and stringers?
#8
Re: A little advice
Originally Posted by David Stotz
By the way don't believe all the stories you are going to hear about the Alpha drive if your boat has one.
Bravo stories you can believe.