More power from my 310hp 454
03-09-2006, 09:59 PM
#21
Registered
Join Date: Mar 2004
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Re: More power from my 310hp 454
I just took my 454 310hp to the machine shop today this is what I am having done: 1 bored to .030 forged pistons
2 Balance complete assembly
3 8.79-1 compression ratio
4 Crane 420hp cam and lifters
5 Dart large oval port heads ported
and flowed 2.19in/1.88exh
6 Crane roller rockers screw in studs
7 ARP rod bolts mains head bolts
8 Crane billet timing chain
9 Eldelbrock oval port intake
10 Eldelbrock 750crm marine carb
11 Melling high volume oil pump
12 Revolution Marine exhaust
It will be done in about three weeks WRP performance is doing the work in Ohio I sure hope it will run better
2 Balance complete assembly
3 8.79-1 compression ratio
4 Crane 420hp cam and lifters
5 Dart large oval port heads ported
and flowed 2.19in/1.88exh
6 Crane roller rockers screw in studs
7 ARP rod bolts mains head bolts
8 Crane billet timing chain
9 Eldelbrock oval port intake
10 Eldelbrock 750crm marine carb
11 Melling high volume oil pump
12 Revolution Marine exhaust
It will be done in about three weeks WRP performance is doing the work in Ohio I sure hope it will run better
Re: More power from my 310hp 454
