Problem with 525/whipple.
#1
AKA NoMoBoatin
Platinum Member
Thread Starter
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Problem with 525/whipple.
Took the boat out to test a set of props from BBlades.gas gauge said 1/4 tank.decided to go to marina to get gas and when i was getting on plane the engine that uses more fuel for some reason started to make a craking noise and wanted to shut down.i was on plane twice when this happened.idled to gas dock put in 15 gal per tank and gauge came upto over 1/2 tank and got on plane again and it did the samething.hummm.looked back at the blower and there is a black thingamijig.it has a vaccum line on it and a rod that goes into it with a lever like it adjust when running.I'll go take a pic of it and post it now.
Last edited by docmanrich37; 03-20-2006 at 07:15 AM.
#2
AKA NoMoBoatin
Platinum Member
Thread Starter
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problem with 525/whipple.
pics.Could it also have got something in the fuel filter from the fuel level being low.
Last edited by docmanrich37; 03-19-2006 at 06:00 PM.
#4
AKA NoMoBoatin
Platinum Member
Thread Starter
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problem with 525/whipple.
I check to see but didn't find anything but a 1" hex head screw in the bilge.motor idles fine.Strip thats the black thing i was talking about.
#5
Re: Problem with 525/whipple.
Originally Posted by docmanrich37
I check to see but didn't find anything but a 1" hex head screw in the bilge.motor idles fine.Strip thats the black thing i was talking about.
Take a pick of the bolt? It might of fell on the installation?
explain better whats it doing??
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#6
AKA NoMoBoatin
Platinum Member
Thread Starter
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problem with 525/whipple.
Originally Posted by Strip Poker 388
I believe its a bypass for when you let out of it???so the boost doesn't spike
Take a pick of the bolt? It might of fell on the installation?
explain better whats it doing??
Take a pick of the bolt? It might of fell on the installation?
explain better whats it doing??
#7
AKA NoMoBoatin
Platinum Member
Thread Starter
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problem with 525/whipple.
Couldn't get the video to load.Another thing i noticed was that the starboard side motor is running very rich with soot on the transom but the motor thats giving me problems has no soot at all on that side.Does this mean it might be running lean?Hope this isn't a internal problem.
#8
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
Re: Problem with 525/whipple.
I would send out a call or post to Dustin at Whipple. He is the most knowledgeable on his blowers and I am sure he can help you find the culprit, hopefully before any damage is done.
RaY @ Raylar
RaY @ Raylar
#10
Registered
Join Date: Aug 2003
Location: Bettendorf,Ia
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problem with 525/whipple.
Does it make the noise in neutral when you rev it? Had a similiar problem on 500efi's after running one of them out of fuel. At about 2700 rpm a popping sound from one motor when under load. Could spin it to 5000 in neutral with no noise. Im no expert but fuel delivery could be the answer.