Longblockbenny

I have the old style elbow tops with the standard bravo wet tailpipes, but I wanna convert to dry tails. I have not cut the transom holes yet thats why I'am looking for a good pair of dry tailpipes for bravo now. Is the new style compatible with the old rope sel type? , If not do any of you guys have a a pair of old style dry for standard bravo holes. I also need 2 stearing rams [imco, mayfair, latham] with the bravo cap, Plz pm meif you have any of this. Thanks

Longblockbenny

so...

Too Old

Do you already have holes drilled in the trasom?

Longblockbenny

no

Too Old

I have a new set I can make you a great deal on.

If interested, I can be reached toll free: 866 921 4553

Fred @ Trick Marine

Panther

Your old CMI wet tails can be converted to dry pipes and you can use the existing stock bravo transom holes.

I had this done on my boat last year. The welder cut the ends of the old pipes off, then extended the pipes out the existing holes. There is a small hole at the end and bottom of the pipes so a small amount of water cools my mufflers, the remainder of the water comes out 1/2" bungs welded onto the pipes on the inside of the boat and dump overboard.