Rigging Dual Batteries
#1
Gold Member
Gold Member
Thread Starter
Rigging Dual Batteries
Can anyone explain how to connect a dual battery set up with a switch. It is on a single outboard. Is it simply connecting the positives through the switch and then the grounds together. The boat currently has a single battery. Thanks
#2
Registered
Join Date: Jan 2003
Location: San Dimas, California
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rigging Dual Batteries
It's very simple using a Perko or Cole Hersee type switch that has 4 positions... bat 1, bat2, both, and off.
Both + cables from the batteries go to corresponding battery lugs on the back of the switch and a separate + cable goes to the motor from a third lug on the back of the switch. Grounds go to ground same as always.
Both + cables from the batteries go to corresponding battery lugs on the back of the switch and a separate + cable goes to the motor from a third lug on the back of the switch. Grounds go to ground same as always.