wrenchman

Who makes a good "flush valve". I want to tee into the water supply line so I can run the engine on the hose without putting the muffs on the drive. I have seen them with a check so that the water does not go back out the drive, but don't know where to find them. Thanks

Lofty

You need a large gate valve on the seawater side of your sea-strainer and a ball valve on the flush inlet. put the flush inlet on the other side of the sea-strainer.

You can get these valves from Grainger, McMaster Carr or any good industrial supply.

chuck21401

This company advertises in the local boat magazine called the NorEaster

http://www.marinetechgroup.com/



A little pricy...but looks like a ready to go solution.

mrv8outboard

perko makes one that goes in the inlet hose. retail 92.00 with two clamps.i put five in this year. simple.

Ted G

iTrader: (1)

I have the Perkos, they work fine, no valves to turn (or forget to turn )

GOODT

I have installed many of the Perko Proflush kits all with great results

wrenchman

Thanks for the response. Sounds like Perco is the way to go.