Bravo One X grease fittings
#1
Registered
Thread Starter
Join Date: Jun 2004
Location: NORWAY
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Bravo One X grease fittings
I would like to know where all the grease fittings are on my outdrive. I seem to just find three:
- two on the coupler
- one on the starboard side of the gimbal housing (for the bearing)
- there are none on the U-joint (premalube good/bad?)
Is there anyone I have overlooked?
I have the std. Merc steering but don`t seem to find any greas fittings on it. What is the best way to lube it?
Thanks
- two on the coupler
- one on the starboard side of the gimbal housing (for the bearing)
- there are none on the U-joint (premalube good/bad?)
Is there anyone I have overlooked?
I have the std. Merc steering but don`t seem to find any greas fittings on it. What is the best way to lube it?
Thanks
#2
Registered
Join Date: Feb 2007
Location: Portland OR
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
I would like to know where all the grease fittings are on my outdrive. I seem to just find three:
- two on the coupler
- one on the starboard side of the gimbal housing (for the bearing)
- there are none on the U-joint (premalube good/bad?)
Is there anyone I have overlooked?
I have the std. Merc steering but don`t seem to find any greas fittings on it. What is the best way to lube it?
Thanks
- two on the coupler
- one on the starboard side of the gimbal housing (for the bearing)
- there are none on the U-joint (premalube good/bad?)
Is there anyone I have overlooked?
I have the std. Merc steering but don`t seem to find any greas fittings on it. What is the best way to lube it?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
East Coast B
General Boating Discussion
3
03-17-2003 10:34 AM