30 outlaw 2005

Im looking to add a Polished stainless steel or aluminum mirror look under my engine hatch. I need it in three pieces. And have no idea where to start looking for prices or product. Any info on who to call. Thanks.

k24u

I was looking for the same thing alum, stainless, mirror, and i have no idea where to look

BY U BOY

LET ME KNOW WHEN YOU FIND OUT.

I HAVE BEEN THINKING OF GETTING A PIECE OF 1/8 STAINLESS CUT AND POLISHED BUT HAVE NOT FOUND ANYONE THAT WILL DO IT.

30 outlaw 2005

Thinking of doing the same thing but would be nice just to give size and have ups drop it off and install...

offthefront

iTrader: (1)

Its a Plastic ....any glass shop should be able to supply it ....


mirrorplex ..................................m

prostock85

http://www.professionalplastics.com/...Acrylic-Mirror

David Stotz

I used mirrored plexiglass. Purchased it from a local plastics supply house. It comes in different thicknesses so be sure to get it thick enough to help prevent flexing. I think mine is .25" they should be able to cut it any size you need. Do not glue it to the hatch but use screws. Use a rubber washer between the hatch surface and the plexiglass. If you don't any movement between the two will cause the glass finish to scratch. I think mine cost about $100.00 for a piece about 6' x 4'. I think the plexiglass is much lighter than SS.
Good luck, Dave

jamieslib

polished aluminum looks just like chrome you can get at any meatal supply shop its the same thing we use on dirt track car bodies $85 for 4x10 sheet www.performancebodies.com

30 outlaw 2005

Thanks for all the great info. Now I have some ordering to do.