Big Center Console Project...SPEED Question
09-04-2006, 08:45 AM
#1
Registered
Thread Starter
Join Date: Oct 2003
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Big Center Console Project...SPEED Question
We are looking to make a big center console, and we are looking for a hull. We will consider a non-open hull for a conversion, since they are so much more available.
We prefer a sterndrive set-up drilled for speedmasters or bravo's, but will consider trs holes as well.
Our plan is a big open boat, with a small forward cabin, set up with moderate power (525 efi's) on a short stagger. We need a 70MPH boat. Are we in the ballpark?
We prefer a sterndrive set-up drilled for speedmasters or bravo's, but will consider trs holes as well.
Our plan is a big open boat, with a small forward cabin, set up with moderate power (525 efi's) on a short stagger. We need a 70MPH boat. Are we in the ballpark?
Platinum Member
