Need a flywheel for a Mark IV 454 TRS
10-20-2006, 12:51 PM
#1
Platinum Member
Platinum MemberThread Starter
Need a flywheel for a Mark IV 454 TRS
Wondering if anyone had a flywheel for a Mark IV 454 with a TRS. My flywheel and balnacer were stolen out of the back of my truck last yea. I am just now getting ready to send the crankshaft out for balancing and noticed I do not have it anymore.
10-20-2006, 10:47 PM
#5
Registered User
Join Date: Aug 2004
Location: Palos Heights, Illinois
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need a flywheel for a Mark IV 454 TRS
It was the 330 horse 454. The engine did not come with the boat. I got all the parts but no block. It now has a 502. I'll see if I dig out the old flywheel and take a picture.
10-21-2006, 07:23 AM
#6
Registered
Join Date: Jan 2006
Location: Howell, MI
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need a flywheel for a Mark IV 454 TRS
I have one on AuctionitonEbay for $60 - not sure if the add has run out yet. It is from my 1991 454 Mag. It is Externally Balanced, so if you are having your crank balanced (internally balanced) you will need to have it machined for zero balance. I live in Howell MI so shipping would not be bad. Send me an email if interested.
Thanks Steve
Thanks Steve
10-22-2006, 09:36 PM
#7
Registered User
Join Date: Aug 2004
Location: Palos Heights, Illinois
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need a flywheel for a Mark IV 454 TRS
phughes69, I have a couple of pictures. the flywheel is 168 teeth on gear. set up for bellhousing mounted starter. PM me if you are interested. i'm in the south Chicago area.
10-22-2006, 11:03 PM
#8
Re: Need a flywheel for a Mark IV 454 TRS
I have at least a dozen of them, if you still need one send me a pm. the last few digits of the part # is 457N
That's the one you need..... BBB
That's the one you need..... BBB
10-24-2006, 10:33 AM
#9
Platinum Member
Platinum MemberThread Starter
Re: Need a flywheel for a Mark IV 454 TRS
Originally Posted by excalibur81
phughes69, I have a couple of pictures. the flywheel is 168 teeth on gear. set up for bellhousing mounted starter. PM me if you are interested. i'm in the south Chicago area.
Last edited by phughes69; 10-24-2006 at 10:36 AM.
