Looking For A Billet Or "Nice" Kill Switch/Lanyard...
02-15-2007, 10:00 PM
#1
Registered
Thread Starter
Join Date: Feb 2005
Location: Southern California
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Looking For A Billet Or "Nice" Kill Switch/Lanyard...
Since I am redoing the stereo in the boat I need to fill a hole. I will need to fill the hole where the clarion wired remote is in my dash.
I could fill the hole with a Livorsi guage but it might look a little odd down low away from the others.
I was thinking if there was someone who makes a nice billet kill switch / lanyard plate or assembly, the spot would be perfect for it.
Anybody...
I could fill the hole with a Livorsi guage but it might look a little odd down low away from the others.
I was thinking if there was someone who makes a nice billet kill switch / lanyard plate or assembly, the spot would be perfect for it.
Anybody...
02-16-2007, 01:50 PM
#2
Registered
Join Date: Apr 2005
Location: Castro Valley, California
Posts: 62
Likes: 0
Received 1 Like
on
1 Post
Depending on the size of the existing hole you could probably use a stock Mercury kill switch and mount it in a bezel made by Dana Danamarineproducts.com They are available in a variety of powercoated colors along with polished clearcoated.
Larry
62 Bel-Air 409
260 Eagle XP HP500EFI
2002 Corvette M6 Coupe
Larry
62 Bel-Air 409
260 Eagle XP HP500EFI
2002 Corvette M6 Coupe
Thread
Thread Starter
Forum
Replies
Last Post
Sydwayz
General Boating Discussion
68
05-11-2006 07:37 PM
