Shift cutout switch...Bravo?
Platinum Member
04-10-2011, 06:58 PM
#12
Charter Member #601
Charter Member
Rotax,
You are talking about two different switches.
Neutral safety switch, only allows the starter to function in Neutral.
Interrupter switch, kills the ignition while shifting. Used on the Alpha drives.
You are talking about two different switches.
Neutral safety switch, only allows the starter to function in Neutral.
Interrupter switch, kills the ignition while shifting. Used on the Alpha drives.
04-10-2011, 10:55 PM
#13
Registered
Join Date: Mar 2011
Location: McHenry,IL/Cape Coral,Fl
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
the purpose of the cutout switch is so you can pull the drive out of gear, it kills the engine for a split second..if their not hooked up the drive will stay in gear even tho the control is in neutral.
thats if this is the switch on the shift cable assenbly...all you have to do is shut the engine off before you try to take it out of gear,once out you will have to restart and select your other gear...it will be a pain to dock with out this switch..
thats if this is the switch on the shift cable assenbly...all you have to do is shut the engine off before you try to take it out of gear,once out you will have to restart and select your other gear...it will be a pain to dock with out this switch..
actually had that prob today , had a wire off my interupt switch , had issues with shifting found problem ,fixxed , and took boat out for maiden voyage ,, and thank you mrfixxall ! thanks for your help with my outdrive
Thread
Thread Starter
Forum
Replies
Last Post
imq707s
General Q & A
2
04-05-2002 07:30 PM
