Any HP guesses before it goes on the dyno next week?

[born2burn]

600cid
Dart Big M tall deck 4.6 bore
Lunati Pro 4.5 stroke crank
Oliver billet 6.7 rods
JE coated dished pistons static 8.7:1
coated bearings
14 qt. pan
Jessel belt drive
Morosso external oil pump
BMF 385 heads with blower CNC program
Jessel pro shaft rockers
Morrel lifters
Blower shop 1471
Blower shop intercooler
Nickerson Stage 5 Dominators 1175cfm each
MSD pro billet distributor
MSD 6M ignition box
CMI Big Tubes with dry tails with o2 sensors in each tail (primaries are 2 and 3/8")
cam specs solid roller
265/269 @.050
lobe lift .4360/.4320
separation 112
timing events @.050 (20.5) (64.5) and (66.5) (22.5)
Duration @ .020 298/304
Gross lift .741/.734
valve lash hot .023/.029

[articfriends]

I woulfd guess 1300-1400hp (with a real correction factor,no bs stuff) if your running 10-12 psi of boost. What drive do you plan on blowing up behind this ,Smitty

[born2burn]

I woulfd guess 1300-1400hp (with a real correction factor,no bs stuff) if your running 10-12 psi of boost. What drive do you plan on blowing up behind this ,Smitty

Goal is 1000hp on pump gas. Going in a 26' cat with Teague Platinum with 1.36's and 2" shorty and realize I will have to be easy on the drive.

[GPM]

What are the flow numbers on the heads?

[born2burn]

What are the flow numbers on the heads?

http://www.thebmfstore.com/ProductDe...5&Show=ExtInfo

[H2Xmark]

you are going to go way over your hp goal if you run some good boost, i dont think that drive will last 5 trips on the water unless you never "run the boat" hard. good luck with your project

[Michael1]

Could be anything, since the horsepower could be corrected for any number of temperatures and pressures. Most tests are corrected so the buyer feels good about his/her purchase.

Michael

[SANLEONKID]

986hp

[born2burn]

you are going to go way over your hp goal if you run some good boost, i dont think that drive will last 5 trips on the water unless you never "run the boat" hard. good luck with your project

Here is a sample of our water i should be fine on the drive if i respect the power and dont hammer it out of the hole.

http://media.putfile.com/born2burn-2005

[born2burn]

Could be anything, since the horsepower could be corrected for any number of temperatures and pressures. Most tests are corrected so the buyer feels good about his/her purchase.

Michael

True in some cases if you dont know what numbers you are looking at/for.