500EFI - .040 Vs .035 Plug Gap
#1
Registered
Thread Starter
500EFI - .040 Vs .035 Plug Gap
I Put New Extended Tip Plugs (R43TS VS R43T) And Had A Brain Fart, Gapped The Plugs At .040 Instead Of .035. Do You Think It Will Be Fine Or Should I Pull All The Plugs And Regap. Thanks For All Your Help.
The Boat Is Going In Tuesday Morning - Finally!!!
The Boat Is Going In Tuesday Morning - Finally!!!
#2
Registered
Join Date: Apr 2001
Location: beaumont tx
Posts: 1,703
Likes: 0
Received 0 Likes
on
0 Posts
you will be ok at .040 where people get into trouble is opening the gap up to try and pick up a few more h.p.'s and they have old spark plug wires and they start misfiring. the stock coil has enough voltage to fire a wider gap than stock.
my 2 cents anyway!!!
my 2 cents anyway!!!