Smartcraft Question..
#1
Registered
Thread Starter
Join Date: May 2006
Location: Lake Mary, FL
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Smartcraft Question..
Hey guys..
Im hooking up a Northstart 557 Chart Plotter on the 288 and am attempting to hookup the Smartcraft interface as well, but I can't seem to get the data to pull.
Any have any experience with hooking up the smartcraft stuff?
The lights flash on the smartcraft interface, and it appears to be talking but no data.
I found a harness on the back of the motor is this the one I need? or is there another hidden some where?
BTW.. 496HO
Thanks for any help.
JW
Im hooking up a Northstart 557 Chart Plotter on the 288 and am attempting to hookup the Smartcraft interface as well, but I can't seem to get the data to pull.
Any have any experience with hooking up the smartcraft stuff?
The lights flash on the smartcraft interface, and it appears to be talking but no data.
I found a harness on the back of the motor is this the one I need? or is there another hidden some where?
BTW.. 496HO
Thanks for any help.
JW