Trim up intermittent, trim down works, still clicks
06-19-2007, 05:02 PM
#1
Registered
Thread Starter
Join Date: Aug 2005
Location: whitby,ontario
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Trim up intermittent, trim down works, still clicks
Hello guys and gals! Great weather up here in Toronto so far!
My Bravo1 trims down fine, but takes 10-15 tries of hittin the up switch to make it work. There is a clicking in the hatch everytime I hit the switch? Haven't been in there yet, as its a pain ( I'm in a wheelchair). Was hoping for some direction so I can go in once with the right tools and parts.
Thanks in advance!
My Bravo1 trims down fine, but takes 10-15 tries of hittin the up switch to make it work. There is a clicking in the hatch everytime I hit the switch? Haven't been in there yet, as its a pain ( I'm in a wheelchair). Was hoping for some direction so I can go in once with the right tools and parts.
Thanks in advance!
06-19-2007, 05:45 PM
#2
Registered
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
sounds as if you have a bad solenoid. also check the lil ground wire coming off the solenoid going to ground, as well as the large red jumper from the other solenoid.
Thread
Thread Starter
Forum
Replies
Last Post
zimm17
General Q & A
3
03-13-2007 05:23 PM
JGB
General Q & A
21
09-28-2004 04:30 PM
