stevesxm

rip the center out of the prop hub ? had a big fountain here do that

rssteiny

it is not the prop had the rear cover off the drive and the cone clutch is not pushing down on the lower gear

rssteiny

now that i know it is a problem with the cone not pushing down on lower gear but works fine pushing up to upper gear and all gears and everything looks fine will i be able to get by this weekend going to and from party cove about 8 miles each way, if i reverse props and run in reverse on my controls, this way i will just not have reverse in 1 drive since b1s are bi rotational. then pull the drive next week and fix.

thanks