Isky Red Zone with Easy Roll Lifters?
07-03-2007, 06:16 PM
#1
I hate the winter!!
Platinum MemberThread Starter
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
Isky Red Zone with Easy Roll Lifters?
I am looking to upgrade to a solid roller cam that Rmbuilder has designed for me. I am thinking about using Isky Red Zone with Esay Roll Lifters. Has anyone tried them or heard good or bad about them? I talked to Rmbuilder and Isky today, they both seem to like them. Isky told me so far there were no failures. Then again, what else would they say. However, I do trust Rmbuilders opinion on this. He has concurred with Isky.
http://www.iskycams.com/BearingFlyer.pdf
http://www.iskycams.com/BearingFlyer.pdf
07-05-2007, 07:50 AM
#3
Registered
Join Date: Feb 2002
Location: KY
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
I have heard the easy rolls are awesome also....wish they had them around 5 yrs ago when I was destroying lifters... on a high HP big inch NA motor with a "small" 280/288 @.050, ~ .780" lift cam...
07-06-2007, 09:08 AM
#7
Registered
I'm using the Isky Red Zone lifters and am in the process of pulling the intake to see if I have a bad one. I'm pretty sure the lifter on #1 intake is bad. I don't think the cam went first but I'll know by tomorrow.
07-06-2007, 03:51 PM
#8
I hate the winter!!
Platinum MemberThread Starter
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
That sucks. Were the lifters the new style with EZ-Roll wheels? We also went for the captive guide bar lifters.
Last edited by Vinny P; 07-06-2007 at 03:55 PM.
07-06-2007, 10:30 PM
#9
Charter Member #601
Charter Member
It is now the top of the nine inning for Joe Schubeck Roller X lifters and they struck out. I have about 90 hrs on my set and two of them have cracks in them.. So that is the reason I am going back to Isky.
Hey maybe the three boxes of old ones I have, they can rebuild them, paint them red and put the EZ wheels on them.. just at thought.
Vinny and I will post back after the 100hr mark and let you know..
Check300, did it do any damage to that killer motor of yours?? I hope not!!
D*ck
Hey maybe the three boxes of old ones I have, they can rebuild them, paint them red and put the EZ wheels on them.. just at thought.
Vinny and I will post back after the 100hr mark and let you know..
Check300, did it do any damage to that killer motor of yours?? I hope not!!
D*ck
Last edited by Mr Gadgets; 07-06-2007 at 10:43 PM.
07-07-2007, 04:44 AM
#10
I hate the winter!!
Platinum MemberThread Starter
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
D*ck,
When comparing the # of hours we put on our boats, I think I will hit 100 hours first. Hopefully, we made the right decision here. I hate being the first kid on the block with the new toy.
Vinny
When comparing the # of hours we put on our boats, I think I will hit 100 hours first. Hopefully, we made the right decision here. I hate being the first kid on the block with the new toy.
Vinny
