Water Impeller questions

Downtown42 · 08-03-2007, 08:51 PM

Mine went out today. I picked up another one, installed it and smoked it again. Question: does the paddle wheel slide in easy? I had to bend the flappers 30% to get in the housing. I bent them clockwise and it was very tight but did fit after I bent them. Are the flappers supposed to be straight-up inside housing or do you guys bend them in hard to fit. Key shaft was perfect, slid right on. I gave the parts guy my serial # on '04-05 525, I hope he knew.

Also, If you have a part # I'd appreciate it. The part number I have 47-59362T Impeller. Thanks alot.

allenk4 · 08-03-2007, 08:55 PM

Good thread on proper impeller replacement procedure:

http://www.teambajamarine.com/forum/...ead.php?t=6560

Downtown42 · 08-03-2007, 09:32 PM

great thread. tell him thnks.

MOBILEMERCMAN · 08-03-2007, 09:48 PM

Good thread if you have a fuel pump on it you should change the lube while its out.
Jim

Downtown42 · 08-04-2007, 02:43 PM

done. now it's supposed to rain I just can't win.