#6 Drives....need advice
#1
VIP Member
VIP Member
Thread Starter
#6 Drives....need advice
I went out and ran my boat yesterday. After last weekend, I had just a little bit of drive fluid in my bilge. I cleaned it up real good and went out yesterday to find out for certain where it was coming from. It's coming in through the transom assembly, right at the donut from the transmission. There was maybe 4-5 ounces that came through into the bilge, but that whole cavity has to be full of fluid for it to come through there (I would think). Obviously, the upper seal is where it's leaking. I called Mercury Racing to get a referral and they told me that are no Mercury #6 techs in Maryland. I hear that it requires special tools for the #6's. There was definately no water in the fluid, still dark green....but I certainly am not going to run it and take a chance at blowing it up!! I've blown up enough chit this year!
How much of a job is it to replace the upper seal?
How much of a job is it to replace the upper seal?
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
Last edited by OldSchool; 10-03-2007 at 01:15 PM.
#5
HHmmmm, thats strange. I got a certificate and everything after I completed that class for Dry Sump Six Drives down in Atlanta.
Oh well. Offshore Performance in Grasonville can help you out. They have all the tools to do repairs. Maybe give Alan or Art a call also. I know Alan deals with a lot of sixes.
Oh well. Offshore Performance in Grasonville can help you out. They have all the tools to do repairs. Maybe give Alan or Art a call also. I know Alan deals with a lot of sixes.
Last edited by Pwrbt33; 10-03-2007 at 07:51 PM.
#6
VIP Member
VIP Member
Thread Starter
HHmmmm, thats strange. I got a certificate and everything after I completed that class for Dry Sump Six Drives down in Atlanta.
Oh well. Offshore Performance in Grasonville can help you out. They have all the tools to do repairs. Maybe give Alan or Art a call also. I know Alan deals with a lot of sixes.
Oh well. Offshore Performance in Grasonville can help you out. They have all the tools to do repairs. Maybe give Alan or Art a call also. I know Alan deals with a lot of sixes.
I'm confused by your post, () check your PM for my phone # and give me a call when you have a minute.
Craig
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
#10
VIP Member
VIP Member
Thread Starter
Thanks Steve. I spoke with Craig Colabella yesterday, I think that a quickie Florida trip is in the cards. He said that I could wait for it!
I need to get the boat on the trailer and pull the drive first to make sure what the problem is. No sense in half-azzing it, the consequences are too great!!!!!!!
I need to get the boat on the trailer and pull the drive first to make sure what the problem is. No sense in half-azzing it, the consequences are too great!!!!!!!
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
Thread
Thread Starter
Forum
Replies
Last Post
bigo181979
General Boating Discussion
11
06-17-2008 07:51 AM
jeff32
General Boating Discussion
12
05-28-2006 10:27 PM
Dean Ferry
General Boating Discussion
4
11-27-2002 08:09 AM