whipple 5.3 anyone using them ?
11-29-2007, 09:37 AM
#1
Platinum Member
Platinum MemberThread Starter
Join Date: Jan 2006
Location: Brookyn NY
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
whipple 5.3 anyone using them ?
Im thinking of building 540 motors with carbed non intercooled 5.3 whipples does anyone have any experiance with this set up ?
Thanks
Howard
Thanks
Howard
12-02-2007, 08:02 AM
#2
Platinum Member
Platinum MemberThread Starter
Join Date: Jan 2006
Location: Brookyn NY
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Gary Thanks,
got my Questions answered , very helpful
You Know your product , members looked here / or looking here with EFI should definately check you out !
Thanks for calling !
(Quote GT)
personally would not put such a big blower on a 509ci motor, but it could be done(seems a little overkill, but it depends on what you are looking to do.)
A lot of builders are running 509 cubic inch motors with a good set of cnc heads with a nice camshaft and getting an honest 800HP out of them on 91 octane with Whipple's 200ax blower(rather than the W305). Its a very reliable combination.
If you would like, give me a call and/or e-mail me and tell me what you are looking to make power wise and I could try and guide you in the right direction. I will tell you this, with a tall deck 540+ ci engine, its VERY easy to make well over 1000Hp with that W305. I really like it alot. But the low profile design of the quad is hard to beat. Once again, Whipple makes great products.
Gary Taylor/TPI (805)480-2693 [email protected]
got my Questions answered , very helpful
You Know your product , members looked here / or looking here with EFI should definately check you out !
Thanks for calling !
(Quote GT)
personally would not put such a big blower on a 509ci motor, but it could be done(seems a little overkill, but it depends on what you are looking to do.)
A lot of builders are running 509 cubic inch motors with a good set of cnc heads with a nice camshaft and getting an honest 800HP out of them on 91 octane with Whipple's 200ax blower(rather than the W305). Its a very reliable combination.
If you would like, give me a call and/or e-mail me and tell me what you are looking to make power wise and I could try and guide you in the right direction. I will tell you this, with a tall deck 540+ ci engine, its VERY easy to make well over 1000Hp with that W305. I really like it alot. But the low profile design of the quad is hard to beat. Once again, Whipple makes great products.
Gary Taylor/TPI (805)480-2693 [email protected]
