exhaust choice
11-29-2007, 05:11 PM
#1
Registered
Thread Starter
Join Date: Jan 2007
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
exhaust choice
hey guys
i was looking for some input or advice on which exhaust system to buy for my 24 ft baja,i have a 615hp 509ci engine to put in it and i have everything to put back together except exhaust,i was going with the eddiemarine thunder package,it is $2200,they say at eddie marine that it would be a great choice for my setup and cam specs,then i talk to cp performance about some lightning headers and he tells me eddie marine is not a good choice and it is a little better than stock cast manifolds,he steered me towards imco powerflos which are expensive,so i want this headers but i know hear that they arent all stainless steel and won last long,it is stressing me out.
my exhaust exits under the swim platform so i need the low drop tail pipes regardless what i use,AND ALSO BLOW ABOUT $18000 ALREADY SINCE SEPTEMBER so there is an exhaust budget HELP
i was looking for some input or advice on which exhaust system to buy for my 24 ft baja,i have a 615hp 509ci engine to put in it and i have everything to put back together except exhaust,i was going with the eddiemarine thunder package,it is $2200,they say at eddie marine that it would be a great choice for my setup and cam specs,then i talk to cp performance about some lightning headers and he tells me eddie marine is not a good choice and it is a little better than stock cast manifolds,he steered me towards imco powerflos which are expensive,so i want this headers but i know hear that they arent all stainless steel and won last long,it is stressing me out.
my exhaust exits under the swim platform so i need the low drop tail pipes regardless what i use,AND ALSO BLOW ABOUT $18000 ALREADY SINCE SEPTEMBER so there is an exhaust budget HELP
11-29-2007, 05:20 PM
#2
Registered
Join Date: Sep 2006
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
hey guys
i was looking for some input or advice on which exhaust system to buy for my 24 ft baja,i have a 615hp 509ci engine to put in it and i have everything to put back together except exhaust,i was going with the eddiemarine thunder package,it is $2200,they say at eddie marine that it would be a great choice for my setup and cam specs,then i talk to cp performance about some lightning headers and he tells me eddie marine is not a good choice and it is a little better than stock cast manifolds,he steered me towards imco powerflos which are expensive,so i want this headers but i know hear that they arent all stainless steel and won last long,it is stressing me out.
my exhaust exits under the swim platform so i need the low drop tail pipes regardless what i use,AND ALSO BLOW ABOUT $18000 ALREADY SINCE SEPTEMBER so there is an exhaust budget HELP
i was looking for some input or advice on which exhaust system to buy for my 24 ft baja,i have a 615hp 509ci engine to put in it and i have everything to put back together except exhaust,i was going with the eddiemarine thunder package,it is $2200,they say at eddie marine that it would be a great choice for my setup and cam specs,then i talk to cp performance about some lightning headers and he tells me eddie marine is not a good choice and it is a little better than stock cast manifolds,he steered me towards imco powerflos which are expensive,so i want this headers but i know hear that they arent all stainless steel and won last long,it is stressing me out.
my exhaust exits under the swim platform so i need the low drop tail pipes regardless what i use,AND ALSO BLOW ABOUT $18000 ALREADY SINCE SEPTEMBER so there is an exhaust budget HELP
You wil find that CMI's make the most power on the Dyno.
If you need a manifold application, IMCO makes the most power.
Stellings look the best and any "full runner length" header will make good power.
Good luck with your search
Gregg Reichman
11-29-2007, 08:10 PM
#5
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
I'd have bought the KE's if money wasn't a problem for me. The KE's really are that expensive, but I went with Dana's, mainly because I thought they looked better than similarly priced exhaust. I like the KE's because not everybody and their brother have them. I think they are cool as hell.
Charter Member
12-03-2007, 03:54 PM
#9
Gold Member
Gold Member
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes
on
32 Posts
Untrue a stainless marine gen 111 will have the best results on a dyno.....If i had a choice which i did i use gen 111 stainless marine......Great warrenty and sound great....I have had gil,imco,cmi amd pattersons......All of which i had some sort of problem with...
