steering id ?
#1
Registered
Thread Starter
Join Date: Feb 2005
Location: nokomis florida
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
steering id ?
anybody reconize the manufacture of this external steering, there is no name or tag on it and i need to do something about the rust, i keep painting it but it comes right back,and i need stainless or open to suggestions as to stopping this problem..
thanks
thanks
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
Yes, looks like IMCO cylinder, but they sure as heck did not make the wing plates out of steel!
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#4
Charter Member #927
Charter Member
I think it's a home made copy of an IMCO. At least the steel parts are. Youcould take it apart and have it powdercoated, It may last a little longer than paint.