Exhaust/Mufflers
#1
Registered
Thread Starter
Exhaust/Mufflers
What is the best exhaust system to maintain dB compliance of under 90 without a power or speed loss for a ProCharged 7 psi and Injected motor about 825 HP?
#2
VIP Member
iTrader: (1)
I'm currently working on building some turn downs with mufflers built in. I run on the Chain as well and as you know noise is the hot topic right now. I will try to keep you posted with details. I plan to market my design soon for local guys. I am also building some 850 hp motors so what I design should work for you as well. I am hopefully going to be 50% less cost than what is out right now.
Smitty
Smitty
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Last edited by Smitty; 12-17-2007 at 08:48 AM.
#4
Registered
Join Date: Nov 2001
Location: Pompano Beach, Florida
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust/Mufflers
I recently tried the CMI Sound Elimination mufflers. Quiet @ idle and open up as exhaust pressure increases. Not quite as loud at WOT. No loss of performance. 540 600 hp motors in 35' Cig.
#5
I hate the winter!!
Platinum Member
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
#7
Charter Member #601
Charter Member
I am running 4" Bola SS mufflers and Drew shotguns. 88dba at idle, takes the bite out of the wot.. breaths freely. Not the prettiest, but it is functional. The noise cops havent pulled me over yet...
#8
Registered
iTrader: (1)
I'm running GGB's with turndowns...
600 hp 509 with Keith Eickerts.
Only 83 db's at idle, NO power loss..
[YOUTUBE]<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/oxkANBpSuKo&rel=1"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/oxkANBpSuKo&rel=1" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>[/YOUTUBE]
I see GGB's website is up again... don't know if their still in the "marine" side of things though...
http://ggb.ca/
Doug
600 hp 509 with Keith Eickerts.
Only 83 db's at idle, NO power loss..
[YOUTUBE]<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/oxkANBpSuKo&rel=1"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/oxkANBpSuKo&rel=1" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>[/YOUTUBE]
I see GGB's website is up again... don't know if their still in the "marine" side of things though...
http://ggb.ca/
Doug
#10
Platinum Member
Platinum Member
I modified a set of stainless 5" HPI's by cutting 90 degree stainless tubing and welding to HPI out lets.
They are very quiet even at speed all you here is blower wine.
They did however bring our EGTs on our 1300hp engines up to an unacceptable temperature level at high rpm.
I believe the HPI's would work well up to 1000hp or or so as they are similar to my GGBs and they worked real well on my Gun with 850HP mills with no noticeable power loss and acceptable EGT's..
Good Luck, I'm still searching for something that will work on my set up, I would be happy with 100dbs at idle.
They are very quiet even at speed all you here is blower wine.
They did however bring our EGTs on our 1300hp engines up to an unacceptable temperature level at high rpm.
I believe the HPI's would work well up to 1000hp or or so as they are similar to my GGBs and they worked real well on my Gun with 850HP mills with no noticeable power loss and acceptable EGT's..
Good Luck, I'm still searching for something that will work on my set up, I would be happy with 100dbs at idle.