ls1nova

I don't have very much hatch clearance and I'm switching from a high rise dual plane/quad-jet to a Victor Jr./HP950. So far I have found out that the Victor Jr. is 6" tall, so it will still clear. That's 1.5" taller than stock intake. Does anyone know if the holley carbs are taller than the quadrajets?

Thanks,
Frank

offthefront

iTrader: (1)

the average Holley carb is 3.25" from the base to the air cleaner flange and around 5" over all in height.

I'll measure one Monday ...

David Stotz

I just measured my 4150. It's 3.25" from the base to the surface the air cleaner sits on.
Dave

nwimbush

QJets are 3.25" to the cleaner base and 4.5" overall.

ls1nova

Thanks guys! Looks like I'll have just enough room.

Noise Pollution

Frank, you'll need two of these also.