Roller cam bearings
02-09-2008, 01:04 PM
#1
Registered
Thread Starter
Roller cam bearings
Anyone using Torrington style roller bearings for you cams?
If so, Did your bearing casings need to be drilled for an oil feed and what size feed did you use?
If so, Did your bearing casings need to be drilled for an oil feed and what size feed did you use?
02-09-2008, 03:36 PM
#2
VIP Member
I wouldn't think ya wouldnt need it in a regular marine application ,unless its race stuff 50mm cams.Ya might try Crower,I think there the first ones to make a cam for the needle bearings. they called it Inrad.They have the SBC 50mm cam size at 1.968 and the 55mm at 2.165
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
02-09-2008, 08:16 PM
#3
Registered
Thread Starter
I wouldn't think ya wouldnt need it in a regular marine application ,unless its race stuff 50mm cams.Ya might try Crower,I think there the first ones to make a cam for the needle bearings. they called it Inrad.They have the SBC 50mm cam size at 1.968 and the 55mm at 2.165
02-10-2008, 11:30 PM
#4
Find someone that has one of these.Hopefully they will know how to use it or atleast know what it is
http://www.bhjinc.com/1products/04-B...entfixture.htm
http://www.bhjinc.com/1products/04-B...entfixture.htm
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
