500 efi aluminum heads
#1
Registered
Thread Starter
Join Date: May 2005
Location: LOTO Performance Boat Center
Posts: 3,897
Likes: 0
Received 0 Likes
on
0 Posts
500 efi aluminum heads
Looking for opinions on aluminum or another replacement head for a Merc 500 efi. Not trying to break the bank or have to do any mapping. Just looking to bolt on and go. Is this possible? Are there any gains to be had? Options or opinions?
Thanks
Thanks
#4
Registered
Thread Starter
Join Date: May 2005
Location: LOTO Performance Boat Center
Posts: 3,897
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered
Thread Starter
Join Date: May 2005
Location: LOTO Performance Boat Center
Posts: 3,897
Likes: 0
Received 0 Likes
on
0 Posts
The complete kit from Ateco includes:
ATECO/DART Pro 1 heads with REV Severe Duty Stainless Intake Valves, REV Inconel Exhaust Valves, FEL-PRO Head, Intake, Timing Cover and Exhaust Gaskets, MANLEY Pushrods, ISKY Roller Hydraulic Cam, Lifters, Springs, Retainers and Locks, ARP Head Bolt Set, True Roller Timing Set and complete Computer Reprograming.
Have several running aound our area with 620+ HP.
ATECO/DART Pro 1 heads with REV Severe Duty Stainless Intake Valves, REV Inconel Exhaust Valves, FEL-PRO Head, Intake, Timing Cover and Exhaust Gaskets, MANLEY Pushrods, ISKY Roller Hydraulic Cam, Lifters, Springs, Retainers and Locks, ARP Head Bolt Set, True Roller Timing Set and complete Computer Reprograming.
Have several running aound our area with 620+ HP.
#9
Registered