1999 30' baja sst sea water pump impellers
04-15-2008, 05:30 PM
#1
Registered
Platinum MemberThread Starter
Join Date: Oct 2003
Location: New Baltimore , M.I.
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
1999 30' baja sst sea water pump impellers
I need to replace the impellers on a 30' baja sst with twin 454mags and the sea water pumps looks to be hard to get to. Any tricks to this job? Has any one tried to do this them self....
04-16-2008, 05:57 AM
#2
Charter Member #927
Charter Member
i don't know about Baja, but I have 1991 454 Mags that were very had to get at the sea water pumps. after a few times of skinned up knucles, I swithched the pumps to cam driven pumps. CP performance carries them.
04-16-2008, 11:27 AM
#4
VIP Member
VIP Member
I'm assuming you're talking about a 29 Outlaw.
Remove the seat back.
It's attached with 1/4" bolts thru the seat base.
Once all the bolts are out, the seat back will come out,
it requires a little prying and twisting, but it will come
out.
After the seat back is out, it's really not that big of
a deal to do.
Remove the seat back.
It's attached with 1/4" bolts thru the seat base.
Once all the bolts are out, the seat back will come out,
it requires a little prying and twisting, but it will come
out.
After the seat back is out, it's really not that big of
a deal to do.
Thread
Thread Starter
Forum
Replies
Last Post
BillR
General Q & A
11
07-29-2022 06:31 AM
LubeJobs42
General Boating Discussion
9
05-04-2003 09:13 AM
