|
 |
If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.
Hello Guys,
I have a brand new gen vi 502 and gm has two oil bypass valves in the engine one on the filter pad and the other in the center in side where the filter adaptor or oil remote filter and cooler housing would bolt up to the block do I run them both or remove them and block just the one on the filter pad on the block?
Platinum Member
read this and be enlightened oil pressure problems from stock hardwareOriginally Posted by Rockfish71
Mark,
VIP Member
I blocked mine off,even bought new ones,desided not to
The only time when you have too much Ammo is when your swimming or on fire
VIP Member
pick
The only time when you have too much Ammo is when your swimming or on fire
Strip, what did you use as a plug? Thanks
A nickel works well with a little grinding.
VIP Member
Its like a freeze plug, I cant remmeber the size it might be in my Thread, or pm Mikes280 he knows off the top of his head the size,I put some locktite on it.Its alittle hard to start.Hope that helps.Rob
The only time when you have too much Ammo is when your swimming or on fire
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote