496 HO trouble codes
#11
Registered
Thread Starter
Join Date: Jun 2007
Location: Texas
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Thanks again fellas. I picked up an impeller and a exhaust temp sensor just to be safe. I will try to change the impeller tonight and go to the lake if it ever stops raining here. I need to get it running right befor the holiday weekend.
I will do a write up on the whipple install, and I think I will pull the motor and add some forged rods and pistons since it is getting close to the end of the season.
Dustin,I will be in contact on your suggestions for pistons etc as soon as my box arrives.
Thanks again Mitch.
I will do a write up on the whipple install, and I think I will pull the motor and add some forged rods and pistons since it is getting close to the end of the season.
Dustin,I will be in contact on your suggestions for pistons etc as soon as my box arrives.
Thanks again Mitch.
#12
Just be sure that there is no grooves in the impeller housing.
Here's a link to the video of your boat, you'll have to sit through a few minutes of some other boats, yours is at the end.
http://www.youtube.com/watch?v=7qThXGeJxkU
Here's a link to the video of your boat, you'll have to sit through a few minutes of some other boats, yours is at the end.
http://www.youtube.com/watch?v=7qThXGeJxkU
#13
Registered
Thread Starter
Join Date: Jun 2007
Location: Texas
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
#14
Registered
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
Thanks again fellas. I picked up an impeller and a exhaust temp sensor just to be safe. I will try to change the impeller tonight and go to the lake if it ever stops raining here. I need to get it running right befor the holiday weekend.
I will do a write up on the whipple install, and I think I will pull the motor and add some forged rods and pistons since it is getting close to the end of the season.
Dustin,I will be in contact on your suggestions for pistons etc as soon as my box arrives.
Thanks again Mitch.
I will do a write up on the whipple install, and I think I will pull the motor and add some forged rods and pistons since it is getting close to the end of the season.
Dustin,I will be in contact on your suggestions for pistons etc as soon as my box arrives.
Thanks again Mitch.