Looking for input on RacePumps.com Pump??
#11
Charter Member #601
Charter Member
Thread Starter
The way this pump works with a regulator after the pump and before the fuel rails is suppose to elimate the pulsing, all of that would be on the input to the regulator. At least that is what I was told, but it is a good point, pulsing on the rail side would be from injectors operating I would think.
#12
Registered
Join Date: Oct 2006
Location: Vt
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
I am currently running one on my 383 small block. The thing is great. Do not run a return line, it will not run properly. I do not run an idle bleed circuit either. I have had no problems with mine. The earlier models did have issues with the seals, but the latest version is good to go. The latest version also flows more. Be aware, there is a chinese version of the first gen pump. I love mine and have a -10 pickup, -8 to my regulator (Aeromotive single intlet/outlet). The pump runs like a champ.
#13
Charter Member #601
Charter Member
Thread Starter
Sneaky... how many hours on this setup? I am hearing more and more positive on this pump. I am going to run it and see if I can improve the setup I have been running..
Thanks!
Dick
Thanks!
Dick
Thread
Thread Starter
Forum
Replies
Last Post
BillR
General Q & A
11
07-29-2022 06:31 AM
Rage
General Q & A
6
07-31-2007 09:45 AM