trim sender wiring
#2
Registered
iTrader: (1)
On the top by the water inlet. Follow the wires from the sending units on the drive, you will see one bolt that holds the cup on the wires in place and keeps water out.
You can see the wires in the middle of one of the pics I posted on this thread.
http://www.offshoreonly.com/forums/g...ghlight=gimbal
You can see the wires in the middle of one of the pics I posted on this thread.
http://www.offshoreonly.com/forums/g...ghlight=gimbal
Last edited by 1BIGJIM; 11-07-2008 at 09:18 AM.
#3
Registered
Thread Starter
Thanks, what i really need is where they come out and go on the inside of the boat,(guess I was not to clear on that sorry) somebody cut mine off when they changed engines for the previous owner, just now getting fixing this issue...thanks Rob