502EFI's
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: Knoxville,TN, USA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
502EFI's
I have two 502EFI's with plenty of mods. I've had them for almost 7 yrs and they've been great. Just overhauled both completely and bored .030. Fast forward...... In the boat, both started quickly. One motor at idle surges up and down for a while.
Any suggestions where to look first ? These are 1996 VST models.
Rebuilds were very thorough. Top to bottom.
Thanks
deboatmon
Any suggestions where to look first ? These are 1996 VST models.
Rebuilds were very thorough. Top to bottom.
Thanks
deboatmon
#2
Registered
Platinum Member
I have two 502EFI's with plenty of mods. I've had them for almost 7 yrs and they've been great. Just overhauled both completely and bored .030. Fast forward...... In the boat, both started quickly. One motor at idle surges up and down for a while.
Any suggestions where to look first ? These are 1996 VST models.
Rebuilds were very thorough. Top to bottom.
Thanks
deboatmon
Any suggestions where to look first ? These are 1996 VST models.
Rebuilds were very thorough. Top to bottom.
Thanks
deboatmon
Just a guess. Not really a lot of info for us to work with.
No blowers? Then maybe a rocker out of adjustment. Still could be a computer issue.
#7
Registered
I had same problem, turned out to be the throttle cable was not coming all the way down to idle. Unhook the throttle cable and see if it still does the recycling. Then you know the throttle is completely closed. Minor adjustment to fix if this is it.