what is my oil capicity?
#2
Registered
Join Date: Mar 2009
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
I would buy 9qts and start pulling the dip stick at 6 1/2 qts. It dependes on how much you really get out of the pan.If i remember right the specks are a little over 8qts.
Last edited by Boat Tech; 04-13-2009 at 07:58 PM.
#3
Charter Member # 55
Charter Member
8qts with a filter. There is always some left in the engine, oil cooler and lines. Put in 7 qts and then re check the dipstick. Also, for the most accurate reading, check it with the boat in the water or at least at similar angle to how the boat sits in the water. Mine will show a half qt difference and look fuller on the trailer.
#4
Registered
Thread Starter
Join Date: Sep 2007
Location: Bettendorf, Iowa
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
8qts with a filter. There is always some left in the engine, oil cooler and lines. Put in 7 qts and then re check the dipstick. Also, for the most accurate reading, check it with the boat in the water or at least at similar angle to how the boat sits in the water. Mine will show a half qt difference and look fuller on the trailer.